Low‐frequency sound absorption of organic hybrid comprised of chlorinated polyethylene and N,N′‐dicyclohexyl‐2‐benzothiazolyl sulfenamide

Abstract

AbstractWe investigated the sound absorption characteristics of an organic hybrid material comprised of chlorinated polyethylene (CPE) as the matrix polymer and N,N′‐dicyclohexyl‐2‐benzothiazolyl sulfenamide (DBS) as the second component of an organic low‐molecular‐weight compound. We found specific crystallites, obtained by annealing, that generated new absorption for a low‐frequency sound in a CPE/DBS blend. We observed two sound absorption peaks, around 300 and 1000 Hz, in the annealed CPE/DBS (50 : 50 w/w) blends, whereas those peaks were not observed in the untreated sample. There were two kinds of crystals with different melting points in the annealed samples. It was confirmed that the crystals with the lower melting point brought about sound absorption at a low frequency. The crystals that had the lower melting point were smaller and/or more disordered than the crystals that had the higher melting point. We calculated the fraction of these two types of crystals from differential scanning calorimetry and wide‐angle X‐ray diffraction measurements. The annealing or reannealing temperature specified the fraction of the crystal with the lower melting point, and the obtained crystal fraction characterized sound absorption frequency. Therefore, it is possible to control the sound absorption frequency of an organic hybrid by heat treatment such as annealing. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006