Lower Body Acceleration and Muscular Responses to Rotational and Vertical Whole-Body Vibration at Different Frequencies and Amplitudes.

Abstract

Aim:The aim of this study was to characterize acceleration transmission and neuromuscular responses to rotational vibration (RV) and vertical vibration (VV) at different frequencies and amplitudes.Methods:Twelve healthy males completed 2 experimental trials (RV vs VV) during which vibration was delivered during either squatting (30°; RV vs VV) or standing (RV only) with 20, 25, and 30 Hz, at 1.5 and 3.0 mm peak-to-peak amplitude. Vibration-induced accelerations were assessed with triaxial accelerometers mounted on the platform and bony landmarks at ankle, knee, and lumbar spine.Results:At all frequency/amplitude combinations, accelerations at the ankle were greater during RV (all P < .03) with the greatest difference observed at 30 Hz, 1.5 mm. Transmission of RV was also influenced by body posture (standing vs squatting, P < .03). Irrespective of vibration type, vibration transmission to all skeletal sites was generally greater at higher amplitudes but not at higher frequencies, especially above the ankle joint. Acceleration at the lumbar spine increased with greater vibration amplitude but not frequency and was highest with RV during standing.Conclusions/Implications:The transmission of vibration during whole-body vibration (WBV) is dependent on intensity and direction of vibration as well as body posture. For targeted mechanical loading at the lumbar spine, RV of higher amplitude and lower frequency vibration while standing is recommended. These results will assist with the prescription of WBV to achieve desired levels of mechanical loading at specific sites in the human body.