Abstract
Cycled storage–discharge (CSD) plasma catalytic process was applied to low-concentration formaldehyde removal from air for the first time. HZSM-5, Ag/HZSM-5 (Ag/HZ), Cu/HZSM-5 (Cu/HZ) and AgCu/HZSM-5 (AgCu/HZ) catalysts were used for the process and their performance for formaldehyde storage and plasma catalytic oxidation of stored formaldehyde towards carbon dioxide was investigated in details. AgCu/HZ exhibited the highest formaldehyde adsorption capacity among these catalysts due to the synergistic effect of Ag and Cu, and it was very selective for oxidizing stored formaldehyde into CO 2 by either oxygen or air plasmas at the discharge stage. The CSD process for low-concentration formaldehyde removal had extremely low energy cost, excellent humidity tolerance and almost no secondary pollution. At the discharge stage, in addition to pure oxygen, air can also be used as the discharge gas for complete oxidation of formaldehyde, and the nitrogen oxides produced can be negligible because the discharge period was much shorter than the storage period. The stability of the AgCu/HZ catalysts during the CSD process was also investigated.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
