Abstract
Fe-Mn oxides was prepared by thermal activation of Mn-rich limonite at different temperatures, and then developed as catalysts for low-temperature NH3-SCR. The obtained samples were characterized by XRD, XRF, TEM, XPS, BET, H2-TPR, NH3-TPD, NH3-SCR model reaction and in situ DRIFTS. The results indicated that Fe-Mn oxides catalyst derived from the thermal treatment at 300 °C (H300) exhibited an excellent NO conversion which was higher than 90% at a temperature range from 130 to 300 °C. The large surface area (95.9 m2/g), large amount of acid sites, suitable reduction behavior, and abundant surface hydroxyl positively responsed to the excellent performance of H300 for NH3-SCR. The results of in situ DRIFTS and kinetic study demonstrated that when the SCR reaction temperature reached to 100 °C, both the Eley–Rideal mechanism and the Langmuir-Hinshelwood mechanism might happen over H300. However, the Langmuir-Hinshelwood mechanism could be approximately neglected at higher reaction temperatures. This study favors the understanding of NH3-SCR mechanism of the prepared provides Fe-Mn oxides and explores new application field for Mn-rich limonite in low-temperature NH3-SCR.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.