Abstract
As low-temperature plasma plays an important role in semiconductor manufacturing, plasma diagnostics have been widely employed to understand changes in plasma according to external control parameters, which has led to the achievement of appropriate plasma conditions normally termed the process window. During plasma etching, shifts in the plasma conditions both within and outside the process window can be observed; in this work, we utilized various plasma diagnostic tools to investigate the causes of these shifts. Cutoff and emissive probes were used to measure the electron density and plasma potential as indicators of the ion density and energy, respectively, that represent the ion energy flux. Quadrupole mass spectrometry was also used to show real-time changes in plasma chemistry during the etching process, which were in good agreement with the etching trend monitored via in situ ellipsometry. The results show that an increase in the ion energy flux and a decrease in the fluorocarbon radical flux alongside an increase in the input power result in the breaking of the process window, findings that are supported by the reported SiO2 etch model. By extending the SiO2 etch model with rigorous diagnostic measurements (or numerous diagnostic methods), more intricate plasma processing conditions can be characterized, which will be beneficial in applications and industries where different input powers and gas flows can make notable differences to the results.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.