Low-temperature low-dose neutron irradiation effects on beryllium

Abstract

Mechanical property results are presented for high quality beryllium materials subjected to low-temperature, low-dose neutron irradiation in water-moderated reactors. Materials chosen were the S-65C ITER candidate material produced by Brush Wellman, Kawecki Berylco Industries P0 beryllium, and a high-purity zone refined beryllium. Mini-sheet tensile and thermal diffusivity specimens were irradiated in the temperature range of ∼100–300 °C with a fast ( E>0.1 MeV) neutron fluence of 0.05–1.0 × 10 25 n/m 2 in the high flux isotope reactor (HFIR) at the Oak Ridge National Laboratory and the high flux beam reactor (HFBR) at the Brookhaven National Laboratory. As expected from earlier work on beryllium, both materials underwent significant tensile embrittlement with corresponding reduction in ductility and increased strength. Both thermal diffusivity and volumetric expansion were measured and found to have negligible changes in this temperature and fluence range. Of significance from this work is that while both materials rapidly embrittle at these ITER relevant irradiation conditions, some ductility (1–2%) remains, which contrasts with a body of earlier work including recent work on the Brush-Wellman S-65C material irradiated to slightly higher neutron fluence.