Abstract
Amorphous KNbO3 (KN) film containing KN nanocrystals was grown on TiN/SiO2/Si substrate at 350 °C. This KN film showed a dielectric constant (εr) and a piezoelectric strain constant (d33) of 43 and 80 pm/V at 10 V, respectively, owing to the existence of KN nanocrystals. Piezoelectric nanogenerators (PNGs) were fabricated using KN films grown on the TiN/polyimide/poly(ethylene terephthalate) substrates. The PNG fabricated with the KN film grown at 350 °C showed an open-circuit output voltage of 2.5 V and a short-circuit current of 70 nA. The KN film grown at 350 °C exhibited a bipolar resistive switching behavior with good reliability characteristics that can be explained by the formation and rupture of the oxygen vacancy filaments. The KN resistive random access memory device powered by the KN PNG also showed promising resistive switching behavior. Moreover, the KN film shows good biocompatibility. Therefore, the KN film can be used for self-powered biomedical devices.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
