Abstract
Hexagonal structure magnetoplumbite ferrites have revealed a higher dispersion frequency than that of nickel ferrites because of the magnetoplumbite's magnetic anisotropy. The magnetoplumbite ferrite densification temperature always exceeds 1000°C and the initial low temperature firing permeability of magnetoplumbite ferrites with added glass is too low (μi=2–4). Therefore, it is desirable to develop a material that has a higher permeability at above 300MHz and can be densified at temperatures below 900°C. The Bi2O3–B2O3–ZnO–SiO2 (BBSZ) glass addition effects on the densification and magnetic properties of Co2Y–NiCuZn ferrite composites with various Co2Y/NiCuZn ferrite ratios were investigated. The densification of Co2Y–NiCuZn ferrite composites was enhanced by the addition of glass at low sintering temperatures (<900°C) due to the liquid phase sintering. Co2Y–NiCuZn ferrite composites with 4wt% BBSZ glass sintered at 900°C show a relative density above 90%, a high-initial-permeability of 5–6, a quality factor of above 30 in the 200–300MHz frequency and a resonance frequency above 1GHz, which can be used in high frequency multilayer chip inductors.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
