Abstract
A monolayer of Sr2Nb3O10 (SNO) is deposited on the Pt/Ti/SiO2/Si (Pt-Si) or Pt/Ti/polyimide (Pt-PI) substrate by using the Langmuir-Blodgett method and employed as a seed-layer for the growth of a crystalline (Na1−xKx)NbO3 (NKN) film at 350 °C. The crystalline NKN film is grown along the [001] direction on the SNO/Pt-Si (or SNO/Pt-PI) substrate. Due to the presence of oxygen vacancies in the SNO seed-layer, the NKN film exhibits low ferroelectric properties and large leakage current. To ameliorate these properties, the SNO/Pt-Si substrate is annealed in a 50 Torr oxygen atmosphere at 300 °C, which removes the oxygen vacancies. Consequently, the NKN film deposited on this substrate exhibits promising electrical properties, namely a dielectric constant of 278, dissipation factor of 1.7%, a piezoelectric constant of 175 pmV−1, and a leakage current density of 6.47 × 10−7 Acm−2 at −0.2 MV·cm−1. Similar electrical properties are obtained from the NKN film grown on the flexible SNO/Pt-PI substrate at 350 °C. Hence, the NKN films grown on the SNO seed-layer at 350 °C can be applied to electronic devices with flexible polymer substrates.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
