Abstract
An experimental study of the low-temperature and low-pressure autoignition of Jet A and surrogate fuels was conducted using the ASTM-E659 standardized test method. Two surrogate fuels (Aachen and JI mixtures), their individual components and two batches (POSF-4658 and POSF-10325) of standardized Jet A were tested using the ASTM-E659 method for a range of fuel concentrations and temperatures. The ignition behaviors were categorized into four distinct ignition modes. The individual hydrocarbon components had a wide range of ignition behaviors and minimum autoignition temperatures (AIT) values depending on the molecular structure. The two Jet A batches showed similar ignition behavior with measured AITs of 229 ±3°C and 225 ±3°C respectively. Both surrogates exhibited similar ignition behavior to Jet A with comparable AITs of 219 ±3.1°C (Aachen) and 228 ±3°C (JI) with the JI mixture proving to be a more suitable surrogate to Jet A in the low-temperature thermal ignition regime.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Loss Prevention in the Process Industries
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
