Abstract

Low-temperature epitaxial growth of AlN ultrathin films was realized by atomic layer deposition (ALD) together with the layer-by-layer, in-situ atomic layer annealing (ALA), instead of a high growth temperature which is needed in conventional epitaxial growth techniques. By applying the ALA with the Ar plasma treatment in each ALD cycle, the AlN thin film was converted dramatically from the amorphous phase to a single-crystalline epitaxial layer, at a low deposition temperature of 300 °C. The energy transferred from plasma not only provides the crystallization energy but also enhances the migration of adatoms and the removal of ligands, which significantly improve the crystallinity of the epitaxial layer. The X-ray diffraction reveals that the full width at half-maximum of the AlN (0002) rocking curve is only 144 arcsec in the AlN ultrathin epilayer with a thickness of only a few tens of nm. The high-resolution transmission electron microscopy also indicates the high-quality single-crystal hexagonal phase of the AlN epitaxial layer on the sapphire substrate. The result opens a window for further extension of the ALD applications from amorphous thin films to the high-quality low-temperature atomic layer epitaxy, which can be exploited in a variety of fields and applications in the near future.

Highlights

  • Since Atomic layer deposition (ALD) is a layer-by-layer process, the in-situ plasma treatment can be applied in each ALD cycle

  • atomic layer annealing” (ALA) is the layer-by-layer, in-situ Ar plasma treatment applied in each ALD cycle to significantly improve the crystal quality of Aluminum nitride (AlN) ultrathin films, converting the structure from the amorphous phase to single-crystalline epitaxial layer

  • The surface heating effect that enhances the reactivity of the following precursors occurs for the improvement of film crystallinity during the ALA treatment

Read more

Summary

Introduction

Since ALD is a layer-by-layer process, the in-situ plasma treatment can be applied in each ALD cycle. The ALA treatment may enhance the adatom movement and migration on the surface, which is favorable for the improved crystallization of the deposited films. We make a proposal of a novel technique and concept of ALA in the ALD process to achieve high-quality epitaxial growth of AlN at a low deposition temperature of 300 °C. By introducing an in-situ, layer-by-layer Ar plasma treatment into each ALD cycle, the crystallinity of ALD-deposited AlN films was improved significantly, and a high-quality AlN epilayer with a thickness of only ~30 nm was achieved. The high-quality AlN layer prepared with the ALA treatment was grown on a bulk GaN epilayer, revealing the 2DEG characteristics near the AlN/GaN heterojunction with the significant improvement of mobility and sheet electron concentration by the in-situ ALA

Methods
Discussion
Conclusion
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call