Low-Switching-Loss Finite Control Set Model Predictive Current Control for IMs Considering Rotor-Related Inductance Mismatch

Abstract

This paper develops a high-performance finite control set model predictive current control (FCS-MPCC) method for induction motors (IM) to ensure the system control performance over the low-switching-frequency (LSF) range, where the switching loss is low. The new controller is based on tripartite calculations in each control period and sliding mode (SM) rotor-related inductance observer. In detail, firstly, to solve the problem that the control performance of the traditional FCS-MPCC methods is low when they are used at low frequencies, tripartite calculations are employed in each control period to improve the prediction accuracy. By dividing one control period into three equal parts and executing the prediction algorithm in each subsection, the current estimation errors become lower compared to the conventional single-step Euler-discretization controller. Then, considering that the performance of an FCS-MPCC controller highly relies on the machine parameter values, but it is hard to directly obtain the accurate rotor-related inductances (mutual inductance and rotor inductance), this paper uses an online parameter observer based on the sliding mode (SM) principle to diagnose them in real time. It needs to be mentioned that when discussing the stability of the sigmoid-function-based SM observer, a new technique called estimation-error-limitation is initially adopted in this paper to simplify the analysis process. Finally, the proposed algorithms are verified by simulation, which is conducted on a three-phase IM at LSF situations.