Low Strain Dynamic Shear Modulus of Cemented Sand from Cone Penetration Test Results

Abstract

Low strain dynamic shear modulus property is generally used to subclassify soil strata, determine elastic settlements under geotechnical structures, and characterize the dynamic nature of soils. Several methods to interpret the dynamic shear modulus of sands from in situ friction cone test results have been developed. These methods used calibration chamber test data of clean sands. Therefore, these methods are not valid for interpreting the shear modulus of cemented sands. Introduced here is an interpretation method to estimate the shear modulus of cemented sand. Thirty-seven friction cone penetration tests (CPTs) were conducted on artificially cemented sand specimens of relative densities ranging from 45 percent to 85 percent and confining pressures ranging from 100 to 300 kPa in a laboratory stress-straincontrolled calibration chamber. Cementation levels of 1 and 2 percent were used in preparing cemented specimens. Resonant column tests were also conducted on the same sand with identical cementation lev...