Abstract
We have investigated an Mg-doped In/sub x/O/sub y/(MIO)-Ag scheme for the formation of high-quality ohmic contacts to p-type GaN for flip-chip light-emitting diodes (LEDs). The as-deposited sample shows nonlinear current-voltage (I--V) characteristics. However, annealing the contacts at temperatures of 330/spl deg/C-530/spl deg/C for 1 min in air ambient results in linear I--V behaviors, producing specific contact resistances of 10/sup -4/--10/sup -5/ /spl Omega//spl middot/cm/sup 2/. In addition, blue LEDs fabricated with the MIO-Ag contact layers give forward-bias voltages of 3.13-3.15 V at an injection current of 20 mA. It is further shown that LEDs made with the MIO-Ag contact layers give higher output power compared with that with the Ag contact layer. This result strongly indicates that the MIO-Ag can be a promising scheme for the realization of high brightness LEDs for solid-state lighting application.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
