Abstract
ABSTRACT We have investigated the feasibility of multimode polysilicon waveguides to demonstrate the suitability of polysilicon as a candidate for multilayer photonic applications. Solid Phase Crystallization (SPC) with a maximum temperature of 1000°C is used to create polysilicon on thermally grown SiO 2 . We then measure the propagation losses for various waveguide widths on both polysilicon and crystalline silicon platforms. We find that as the width increases for polysilicon waveguides, the propagation loss decreases simila r to crystalline silicon waveguid es. The difference in loss between the two platforms for a given waveguide width is du e to the scattering from the polysilicon grain boundaries, which excites higher order modes. Depending on the waveguide width, these modes either propagate as higher order modes or are lost as radiation modes. Due to their different propagation constants, the presence of higher order modes is confirmed using sub-wavelength grating couplers. At a waveguide width of 10µm, polysilicon and crystalline silicon waveguides have propagation losses of 0.56dB/cm and 0.31dB/cm, respectively, indicating there is little bulk absorption from the polysilicon. This propagation loss is the lowest for polysilicon demonstrated to date. Modal conversion in multimode waveguides by polysilicon grain boundary scattering are investigated using a sub-wavelength grating coupler and discussed. These results vindicate the use of polysilicon waveguides of varying widths in photonic integrated circuits. Keywords: Silicon photonics, optical interconnects, waveguides, polycrystalline silicon, grating coupler, MMI
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.