Abstract
Low-loss gallium(Ga3+)-diffused erbium(Er3+)-doped LiTaO3(Ga:Er:LiTaO3) channel waveguide was fabricated using erbium metal film diffusion followed by photolithographically patterned gallium oxide(Ga2O3) strip diffusion. Secondary ion mass spectrometry analysis shows that Er3+ concentration follows a Gaussian profile, Ga3+ concentration follows a sum of two error functions at the waveguide surface and a Gaussian profile in the depth direction. Optical studies show that the waveguide supports single-mode propagation at 1.5 μm wavelength with a coupling loss <1 dB and a waveguide loss 0.2(0.3) dB/cm for the TE(TM) mode, and with a small polarization dependence in mode field distribution. Stable optical gain of ∼1.0 dB/cm was measured at 1547 nm wavelength with 220 mW pump power of 980 nm wavelength, indicating good photorefractive damage resistance of the waveguide.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.