Abstract

Virtual synchronous machine (VSM) based high voltage dc systems enhance the inertia of the power system. However, the dynamic interactions between the VSM-based rectifier station, the inverter station, and the grid could induce the system oscillation, which has been investigated in this article. At first, the hybrid ac–dc impedance models of the VSMs considering the coupling between the ac and dc dynamics are established. Then, the relationships between the dc impedance, <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">dq</i> -frame impedance, and the hybrid ac–dc impedance are presented. It is found that the dc impedance of the VSM-based inverter station and the d-d channel impedance of the <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">dq</i> -frame impedance of the rectifier station behave as negative resistors in the low-frequency range. Moreover, a five-dimensional impedance stability criterion based on the hybrid ac–dc impedance and generalized inverse Nyquist criterion is proposed to assess the system stability. The analysis results show that the low-frequency oscillation occurs when the grid short-circuit ratio of the rectifier station is small. Finally, the simulation and experimental results verify the impedance models and the stability criterion.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call