Abstract
We review integrated circuits for low-frequency noise and offset rejection as a motivation for the presented digitally-assisted neural amplifier design methodology. Conventional AC-coupled neural amplifiers inherently reject input DC offset but have key limitations in area, linearity, DC drift, and spectral accuracy. Their chopper stabilization reduces low-frequency intrinsic noise at the cost of degraded area, input impedance and design complexity. DC-coupled implementations with digital high-pass filtering yield improved area, linearity, drift, and spectral accuracy and are inherently suitable for simple chopper stabilization. As a design example, a 56-channel 0.13 [Formula: see text] CMOS intracranial EEG interface is presented. DC offset of up to ±50 mV is rejected by a digital low-pass filter and a 16-bit delta-sigma DAC feeding back into the folding node of a folded-cascode LNA with CMRR of 65 dB. A bank of seven column-parallel fully differential SAR ADCs with ENOB of 6.6 are shared among 56 channels resulting in 0.018 [Formula: see text] effective channel area. Compensation-free direct input chopping yields integrated input-referred noise of 4.2 μVrms over the bandwidth of 1 Hz to 1 kHz. The 8.7 [Formula: see text] chip dissipating 1.07 mW has been validated in vivo in online intracranial EEG monitoring in freely moving rats.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Transactions on Biomedical Circuits and Systems
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
