Abstract
The multi-family residential building sector is the least energy efficient in the United States, thus allowing for ample opportunities for significant cost-effective energy and carbon savings. In the present study, we propose a district solar borehole thermal solar energy storage (BTES) system for both retrofit and new construction for a multi-family residence in the Midwestern United States, where the climate is moderately cold with very warm summers. Actual apartment interval power and water demand data was mined and used to estimate unit level hourly space and water heating demands, which was subsequently used to design a cost-optimal BTES system. Using a dynamic simulation model to predict the system performance over a 25-year period, a parametric study was conducted that varied the sizes of the BTES system and the solar collector array. A life-cycle cost analysis concluded that is it possible for an optimally-sized system to achieve an internal rate of return (IRR) of 11%, while reducing apartment-wide energy and carbon consumption by 46%. Both a stand-alone and solar-assisted ground-source heat pump system were designed and simulated for comparison to the BTES system, and found to be less economically favorable than the solar BTES system. Thus, the promise for district-scale adoption of BTES in multi-family residences is established, particularly for new buildings.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.