Low cycle fatigue properties of CoCrFeNiMn high-entropy alloy with heterogeneous microstructure

Abstract

Heterogeneous microstructure is a hot topic in materials science which facilitates tackling the dilemma of strength-ductility trade-off in engineering materials including high-entropy alloys. The present investigation was conducted on the impact of different microstructures including heterogeneous microstructure, constructed by thermomechanical treatment including cold rolling followed by annealing, on the monotonic and cyclic behavior of a CoCrFeNiMn high-entropy alloy. The tailored microstructure contained three features: non-recrystallized as a hard domain, ultrafine-recrystallized, and fine-recrystallized regions. A desirable combination of strength and ductility including UTS of ∼1.1 GPa together with an elongation of ∼15 % was achieved due to benefiting from hetero-deformation-induced hardening and activation of deformation twins in the fine recrystallized grains. Regarding low-cycle fatigue behavior, at the strain amplitude of 0.4 %, heterogeneous microstructure exhibits remarkable fatigue properties, including high maximum stress and extraordinary lifetime (more than 2 × 105). The compelling reasons for these desirable properties are triggering deformation twins in fine recrystallized grain, the absence of brittle sigma phase as a good location of crack initiation, and the non-recrystallized area as a hard domain for suppressing crack propagation. The results suggested that the heterogeneous microstructure has significant benefits during applying low strain amplitude, however, at high strain amplitude, grain refinement is not recommended, and coarse-grained microstructure provides better properties. The present investigation is a step forward to understand the significance of heterogeneous microstructures to improve fatigue properties of high- or medium-entropy alloys.