Abstract
Cheap ferritic stainless steel is applied here as the counter electrode substrate in dye sensitized solar cells with cobalt complex electrolyte. A 5.0% efficiency was reached with these type of cells which is more than 2.5 times higher compared to previously reported devices with metal counter electrode and cobalt complex electrolyte. The electrochemical impedance spectra analysis showed that the best cells with the ferritic steel counter electrode had as low charge transfer resistance (3.6 Ωcm2) as the reference glass cells with the same electrolyte. While in previous studies many metals have corroded in the cobalt complex electrolyte, the stability analysis including scanning electron microscope imaging of the aged electrodes suggested that the ferritic stainless steel substrates did not corrode in the electrolyte. Hence ferritic stainless steel appears as a possible alternative counter electrode in dye solar cells with cobalt electrolyte in terms of cost, performance and stability.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.