Abstract
Although hydrogen is expected to play an important role in the storage of energy from renewable energy sources, technology to produce hydrogen at low cost is needed for its widespread use. The key to the low-cost production of hydrogen with a polymer electrolyte membrane (PEM) water electrolysis system, which is widely used today, is to replace the Au- or Pt-coated Ti with a low-cost material that can be manufactured from inexpensive, corrosion-resistant, and conductive components. We studied titanium suboxide (Ti4O7)-coated titanium (Ti) bipolar plates, which can be substituted for commonly used Pt-coated Ti bipolar plates, as an inexpensive way of producing the PEM water electrolysis system. The water electrolysis characteristics of the cell were evaluated using Ti4O7-sputtered Ti for the bipolar plates of the water electrolysis cell, and the applicability of Ti4O7-sputtered Ti was investigated. The Ti4O7-sputtered Ti had a very low contact resistance (4–5 mΩ cm2) before and after voltage application that was equivalent to that of gold or platinum plating. The efficiency of water electrolysis in this study was comparable to those of previous reports using bipolar plates coated with precious metals. This development opens the door for fabrication of low-cost electrolyzers as well as related electrochemical devices such as fuel cells, sensors, catalysts, and air or liquid cleaning devices.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.