Low-Cost Air Purifier Prototype Using a Ventilating Fan and Pump Against Haze Pollution

Abstract

This study aimed to focus on the design and development of low-cost do-it-yourself (DIY) air purifiers, using a ventilating fan, air pump, water pump, and an ultrasonic generator that can be used during the haze pollution. Six types of household air purifiers were fabricated. The amount of particulate matter (PM) and carbon dioxide (CO2) levels were recorded at 0, 10, 20, 30, and 60 min (min), then, repeated 3 times. After 10 min of the 3rd experiment of each study, the last measurement of air pollution would be recorded. The results showed at 60 min, the high-efficiency particulate air (HEPA) filter and electrostatic fiber was the best technique regarding reduction of PM and CO2 levels. The highest PM reduction rate had occurred at 30 min using an air pump procedure (99.330 to 100%). The CO2 levels of all experiments had fluctuated at different times. After 10 min of a closed machine, PM levels of all air purifier systems were decreased, except HEPA filter and electrostatic fiber types. In conclusion, the best method for reducing particulate matter and cost without taking humidity into account is an air pump technique, whereas the HEPA filter and electrostatic fiber method is the best choice for lowering PM levels without increasing humidity and vapor production.