Abstract
The technological parameters and the mechanism of low-acid pulp extraction of tantalum were investigated. The results show that hydrofluoric acid concentration, sulfuric acid concentration, organic to pulp phase ratio, the concentration of tantalum and niobium, contact time and temperature have a significant effect; optimum process operating parameters were established as follows: hydrofluoric acid concentration 1.6 mol/L, sulfuric acid concentration 0.6 mol/L, organic to pulp phase ratio 3:1, tantalum concentration 26.61 g/L, niobium concentration 11.64 g/L, contact time 5min and room temperature. Under these experimental conditions, tantalum extraction can reach more than 98% and the separation factors of Ta/Nb, Ta/Fe and Ta/Sn were maximal. According to slope analysis, the equimolar series method and the saturation capacity method, the extraction product was identified as 3MIBK center dot H2TaF7.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Solvent Extraction Research and Development, Japan
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
