Long-term mechanical and acoustic emission characteristics of creep in deeply buried jinping marble considering excavation disturbance

Abstract

To obtain a complete understanding of the stability of deep caverns after excavation disturbance, a laboratory simulation method for testing surrounding rock under excavation disturbance was systematically proposed. The rock creep mechanical behavior considering excavation disturbance was compared with that of rock without excavation disturbance, and the results show that the long-term rock strength considering excavation disturbance is significantly lower than that without excavation disturbance at a 2400 m depth. Based on this method, a step-loading triaxial creep and associated acoustic emission (AE) test was carried out with a single-stage loading time of 5 days and a total loading time of approximately 50 days. The results show that with an increase in stress level, the transient strain of the deep rock increases nearly linearly, while the axial creep strain rate increases exponentially. The AE monitoring results demonstrate that when the rock creep transforms from the initial creep stage to the steady-state creep stage, and from the steady-state creep stage to the accelerating stage, the AE amplitude will clearly exhibit a band-shaped distribution, and the AE count rate and AE energy rate will show a single peak or multiple peaks. Multistage AE data can be used to determine the long-term strength of rock. In addition, with an increase in the stress level, the microcracks of the deep rock under excavation disturbance transform from closed primary microcracks to initiating, propagating and coalescence secondary microcracks, which ultimately leads to macroscopic shear failure. The above research results can provide a reference for deep resource exploitation and deep cavern stability evaluation.