Abstract
ABSTRACT The fate and effects of two nearshore discharges of Murban crude oil at Long Cove, Searsport, Maine in August 1981 were studied following a one-year, pre-spill baseline study of the test areas. An upper and a lower intertidal sampling area within a 60 × 100 meter test plot were exposed to dispersed oil in water resulting from the discharge of 250 gallons of oil pre-mixed with 25 gallons of Corexit 9527 dispersant. Release of treated oil was around high-water slack tide on the surface of the water, with added mixing energy provided by mixing gates deployed by small boats. The maximum water depth over the test areas was 3.5 meters. Untreated crude oil (250 gallons) was released on an ebbing tide within a separate, boomed-off 60 × 100 meter test plot. A third test plot served as an oil-free reference plot. Water samples taken near the surface and near the bottom during and after discharge showed that chemically dispersed oil loses lower boiling hydrocarbons in both the aliphatic and aromatic fractions below n-C17as the droplets diffuse downward. Data are given for sediment samples taken from the test plots 11 months pre-spill and 10 months post-spill. Hydrocarbon analyses of the sediment samples show little incorporation of dispersed oil into the sediments of the treated oil plot relative to the sediments exposed to undispersed oil.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
