Abstract
Heat management mechanisms play a pivotal role in driving the design of nanowire (NW)-based devices. In particular, the rate at which charge carriers cool down after an external excitation is crucial for the efficiency of solar cells, lasers, and high-speed transistors. Here, we investigate the thermalization properties of photogenerated carriers by continuous-wave (cw) photoluminescence (PL) in InP and GaAs NWs. A quantitative analysis of the PL spectra recorded up to 310 K shows that carriers can thermalize at a temperature much higher than that of the lattice. We find that the mismatch between carrier and lattice temperature, ΔT, increases exponentially with lattice temperature and depends inversely on the NW diameter. ΔT is instead independent of other NW characteristics, such as crystal structure (wurtzite vs zincblende), chemical composition (InP vs GaAs), shape (tapered vs columnar NWs), and growth method (vapor-liquid-solid vs selective-area growth). Remarkably, carrier temperatures as high as 500 K are reached at the lattice temperature of 310 K in NWs with ∼70 nm diameter. While a population of nonequilibrium carriers, usually referred to as "hot carriers", is routinely generated by high-power laser pulses and detected by ultrafast spectroscopy, it is quite remarkable that it can be observed in cw PL measurements, when a steady-state population of carriers is established. Time-resolved PL measurements show that even in the thinnest NWs carriers have enough time (∼1 ns) after photoexcitation to interact with phonons and thus to release their excess energy. Nevertheless, the inability of carriers to reach a full thermal equilibrium with the lattice points to inhibited phonon emission primarily caused by the large surface-to-volume ratio of small diameter NWs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.