Abstract
The vehicle particle model was built to compare and analyze the effectiveness of three different collision avoidance methods. The results show that during vehicle high-speed emergency collision avoidance, lane change collision avoidance requires a smaller longitudinal distance than braking collision avoidance and is closer to that with a combination of lane change and braking collision avoidance. Based on the above, a double-layer control strategy is proposed to avoid collision when vehicles change lanes at high speed. The quintic polynomial is chosen as the reference path after comparing and analyzing three polynomial reference trajectories. The multiobjective optimized model predictive control is used to track the lateral displacement, and the optimization objective is to minimize the lateral position deviation, yaw rate tracking deviation, and control increment. The lower longitudinal speed tracking control strategy is to control the vehicle drive system and brake system to track the expected speed. Finally, the lane changing conditions and other speed conditions of the vehicle at 120 km/h are verified. The results show that the control strategy can track the longitudinal and lateral trajectories well and achieve effective lane change and collision avoidance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.