Abstract
An improved understanding of the impact of tillage systems on soil hydraulic properties is necessary to conserve and manage soil water under a changing climate. The objective of this study was to specifically measure soil hydraulic properties (total porosity, water infiltration, saturated hydraulic conductivity, and water retention characteristics) in no-till, chisel plow, disk, and moldboard plow systems under rainfed continuous corn (Zea mays L.) after 35 yr on silty clay loam soils in eastern Nebraska. We measured ponded water infiltration (positive soil water pressure) and tension (−1kPa matric potential) infiltration to exclude macropore (>125μm diameter) flow. Tillage treatments affected ponded infiltration only. Moldboard plow significantly increased ponded infiltration rate by 21.6cmh−1 at 5min and by 8.8cmh−1 at 60min compared with no-till. However, when compared with disk and chisel, moldboard plow increased ponded infiltration rates at all measurements times, which lasted 3h. Regarding cumulative infiltration, moldboard plow increased cumulative infiltration by 26.9cm to 39.0cm after 3h compared with other tillage systems. Similarities in tension infiltration suggest that the higher ponded infiltration for moldboard plow was most likely due to the presence of voids or fractures (>125μm) created by full inversion tillage. Total porosity, saturated hydraulic conductivity, and water retention among the treatments did not differ. Overall, soil hydraulic properties did not differ among tillage systems except water infiltration in these silty clay loam soils after 35yr of management.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.