Abstract

Geothermal energy piles (GEPs) are an environmentally friendly heat exchange technology that dualizes the role of the structural foundation pile for load support and in meeting the building heating/cooling need. Energy loops made from high-density polyethylene, which allow heat carrier fluid circulation, are fitted into the pile foundation elements to extract or inject and store heat energy in the soil surrounding the pile. This paper reports the results of a numerical study investigating the long-term behaviour of a group of energy piles embedded in unsaturated soils (sand and clay) under continuous cyclic heating and cooling load. Additionally, two scenarios were investigated where: (1) the whole GEPs were heated and cooled collectively; (2) alternate piles were heated and cooled. It was found that the trend of temperature magnitude at all the observed locations decreases with time as a result of the continuous heating and cooling cycles. Furthermore, subjecting alternate GEPs to the heating and cooling cycles result in lower temperature development in comparison to thermally activating all the GEPs in the group. This is attributed to the applied thermal load, which is 0.5 times that considered in the first case. However, this might not be the case where equal thermal load is applied on the GEPs in the two cases investigated.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call