Abstract

The sliding layer is an important component of the China Railway Track System (CRTS) Ⅱ slab track on bridges, and its friction performance has a significant influence on the intensity of track–bridge interaction (TBI). However, the friction performance deterioration of this sliding layer under actual repeated abrasion and harsh environmental conditions is difficult to grasp since structural health monitoring implementation into in-service high-speed railway tracks is extremely hard to be permitted and only limited valuable monitoring datasets are available at present. In this study, the friction performance degradation of the sliding layer was therefore investigated using long-term monitoring data from a multi-span simply supported box girder bridge. First, the friction-induced strain in the base plate was decoupled using the monitored strain at the fixing point and mid-span based on mechanical properties of TBI. Then, structural health monitoring and finite element analysis both indicated an approximately linear relationship between the decoupled friction-induced strain and the temperature of the investigated bridge under certain circumstances. Furthermore, the correspondence between the slope of this linear relationship and the friction coefficient was modelled. Finally, the friction coefficients of the sliding layers on target spans were identified using 4 years of monitoring data and the established correspondence model to analyse the statistical characteristics and degradation performance of the layers. This investigation of the friction performance degradation of the sliding layer in the CRTS II slab track system provides guidance for future maintenance and replacement decision making.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call