Abstract
Different biocathode electrode materials (graphite felt and carbon brush, GF and CB) and exchange membranes (proton exchange membrane and cation exchange membrane, PEM and CEM) were used in three microbial fuel cell (MFC) configurations operated for 300-days to investigate the power generation and the COD and N removal performance. Results showed no effect on the COD removal (all above 96%); however, the power generation (46.11 mW·h) and denitrification performance (68.0 ± 1.6%) of the MFC-B (GF + PEM) system were higher than those of the other systems (MFC-A: CB + PEM; MFC-C: CB + CEM) (P < 0.01), and the power generation and denitrification performance of all three systems decreased with time (P < 0.01). By analyzing the physicochemical properties of the exchange membrane and cathode electrode materials, the reasons that affect the power generation performance of the system were clarified. Furthermore, the increase in bioelectricity enhanced the electricity-related nitrification and denitrification reactions. The average 300-day unit denitrification cost of MFC-A was 4.2 and 6.3 times that of MFC-B and MFC-C, respectively. Comprehensive consideration of electricity generation, denitrification, and service life, combined with cost analysis and better selection of construction materials, provides a theoretical basis for the long-term stable operation and sustainable application of MFCs.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
