Abstract
Long-term effects of Pb2+ on the operating performance and membrane fouling of two hydrolytic-anoxic-oxic-membrane bioreactors treating synthetic electroplating wastewater were investigated. The COD, NH4+-N and TN removal efficiencies decreased by 5.5%, 10.4% and 7.9% with long-term exposure of 2 mg L−1 Pb2+, while serious decreases achieved 25.4%, 35.0% and 26.2% with 6 mg L−1 Pb2+ exposure, respectively. 2 mg L−1 Pb2+ mitigated the cake layer fouling rate by 25.4% but increased the pore blocking rate by 69.1%, which was contributed by the increase of low and moderate molecular weight (MW) components in the soluble and colloidal foulants (SCFs). 6 mg L−1 Pb2+ accelerated the cake layer fouling rate by 101.1%, but mitigated the pore blocking rate by 6.4% due to the increase of high MW SCFs (especially polysaccharides). Thermodynamic analyses showed that Pb2+ regulated the concentration and protein/polysaccharide ratio of loosely bound extracellular polymeric substances, thus changing the flocs hydrophobicity and aggregation capacity, leading the cake layer fouling rate variation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.