Abstract
In order to study the long-term bearing capacity of concrete pile composite foundation in the Salt Lake area, based on the Tehran Isfahan high-speed railway project in Iran, the full (semi) immersion drying test and rapid freeze-thaw test was carried out, and the specimens were scanned by electron microscope. Numerical calculations were used to study the effects of different pile strengths and design parameters on the long-term bearing capacity of the composite foundation. The main conclusions were as follows: The concrete specimens in the adsorption zone deteriorated earlier and faster. In the rapid freeze-thaw tests, the strength attenuation of high-strength (C40, C50) specimens was smaller than that of low-strength specimens (C20). Within 20 years after construction, the additional settlement of low-strength (C20) piles was 12.21 mm, while high-strength concrete was less affected by deterioration. With pile spacing ranging from 1.8 m to 4.5 m, the maximum increase in additional settlement under the C20 condition was about 20 mm. The pile-soil stress ratio under the three conditions increased by 2.42, 6.59, and 8.63. As the pile length and diameter increased, the peak stress of the pile body moved towards the pile end, and the changes in the pile-soil stress ratio under the three conditions were similar.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.