Long-Range Acoustic Communication Using Differential Chirp Spread Spectrum

Abstract

Here, we propose a new modulation method using chirp spread spectrum (CSS) modulation to indicate the result of long-range acoustic communication (LRAC). CSS modulation had outstanding matched filter characteristics even though the channel was complex. The performance of the matched filter depends on the time–bandwidth product. We studied the method of using the same modulation method while increasing the amount of the time–bandwidth product. When differential encoding is applied, the de-modulation is made using the difference between the current symbol and the previous symbol. If the matched filter is applied using both the current and the previous symbol, such as the use of two symbols, the amount of the time–bandwidth product can be doubled, and this method can make the output of the matched filter larger. The proposed method was verified in lake and sea experiments, in which the experimental environment was analyzed and compared with the result using the channel impulse response (CIR) of the lake and sea. The lake experiment was conducted over a distance of about 100–300 m between the transmitter and receiver and at a depth of ~40 m. As a result of the communication, the conventional method’s bit error rate (BER) was 1.22×10−1, but the proposed method’s BER was 1.98×10−2. The sea experiment was conducted over a distance of ~90 km and at a depth of ~1 km, and the conventional method BER in this experiment was 1.83×10−4, while the proposed method’s BER was 0.