Logging evaluation of lamina structure and reservoir quality in shale oil reservoir of Fengcheng Formation in Mahu Sag, China

Abstract

The Fengcheng Formation in the Mahu Sag of the Junggar Basin is composed of a set of fine-grained sedimentary rocks located under a layer of alkaline lacustrine rocks. There are alternating dolomite lamina, siltstone and organic matter laminae that show strong heterogeneity. The lamina structure determines reservoir quality and oil-bearing potential in shales. Therefore, the identification of lamina structure is a crucial basis for identifying reserves of shale oil. Identified as massive, layered and laminated, three different types of lamina structures are divided according to core observations in terms of the density of the laminae and the overlapping relationships. High-resolution processing is also performed on dynamic image log data to form slab images for recognizing the various types of lamina structures. Compared to core slab photos, it is believed that slab images offer an excellent thin-layer resolution of up to a millimeter in scale and can effectively identify the lamina structure of the shale reservoir. There are no evident beddings on the core of the massive pattern, and the slab image shows a bright or dark block pattern. There are centimeter-level felsic bands of fine silt sand on the thin-layered sedimentary fabric core, and the slice image shows a band-like pattern. A large number of millimeter-level dolomitic laminae are enriched on the core of the laminated type, and the slab image shows millimeter-level light and dark lamina. Slab images were used for the division and identification of lamina structures in a single well. Then, the relationships between the three types of lamina structures and the two-dimensional nuclear magnetic resonance logs and oil test data were recorded. The results show that massive and laminated pores are dominated by intergranular pores with low porosity and movable oil content. Therefore, only low oil flow can be obtained during an oil test. However, the layered type due to centimeter-level silty bands, T1 and T2, is bimodal with high porosity, movable oil content, and high levels of hydrocarbon production. Therefore, the optimal areas of shale reservoirs are closely related to the layered type. The more significant the proportion of layered types in shale reservoirs, the higher the quality of the reservoir. The present study is intended to identify lamina structure-controlled reservoir quality and oil accumulation and to provide insights into the exploration and development of shale oil.