Abstract
Over the conventional limit equilibrium method and limit analysis method, the finite element method is advantageous, especially for slopes involving complex failure mechanisms where the critical slip surfaces cannot be represented by log spirals and other similarities. In the presence of tension cracks at slope crests, however, the finite element method encounters difficulties in convergence while handling Mohr–Coulomb’s yielding surfaces with tensile strength cut-off. Meanwhile, the commonly used load-controlled method for the system of nonlinear equilibrium equations is hard to bring the slope into the limit equilibrium state. The two drawbacks drag down the finite element method in more extensive applications. By reducing the constitutive integration of plasticity with non-smooth yielding surfaces to the mixed complementarity problem, the convergence in numerical constitutive integration is established for arbitrarily large incremental strains. In order to bring the slope to the limit equilibrium state, a new displacement-controlled algorithm is designed for the system of nonlinear equilibrium equations, which is far more efficient than the load-controlled method. A procedure is proposed to locate tension cracks. Corresponding to the Mohr–Coulomb failure criterion with and without tensile strength cut-off, the failure mechanisms differ significantly, while the difference in the factor of safety might be ignorable.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.