Abstract
ABSTRACTThe NW Bohemia/Vogtland region is characterized by currently ongoing geodynamic processes within the intracontinental lithospheric mantle. Among others, this activity results in the occurrence of mid‐crustal earthquake swarms and CO2 degassing zones called mofettes. These two natural phenomena are related to each other since it is considered that fluid flow and fluid‐induced effective stress can trigger earthquake swarms. At the Earth’s surface, they appear spatially separated, but their connection could be explained by the existence of pathways within the crust that allow efficient and permanent fluid transport. However, neither the structure nor the position of such pathways has been imaged yet.With this background, we used a matched field processing analysis within the NW Bohemia/Vogtland region to locate mofettes and investigate their characteristics. Considering the CO2 degassing process as a high‐frequency noise source, we chose two different test sites: the Dolní Částkov Borehole, which is an artificial mofette that we used to validate the method, and the South Hartoušov mofette field, a natural CO2 degassing area. On both sites, we measured seismic noise in a continuous mode for several hours (7 hours to 9 hours), with a sampling frequency of 250 samples/second, in multiple campaigns using an array of about 60 × 60 m2 with approximately 30 randomly distributed stations.For the matched field processing computation, the phase velocity of the study area is required, which we obtained from active seismic experiments with vertical hammer‐blow as the source. The phase velocity varies between 200 m/s and 420 m/s for Dolní Částkov and between 100 m/s and 280 m/s for South Hartoušov, both in a frequency range of 7 Hz–60 Hz.With the matched field processing analysis at the artificial mofette in Dolní Částkov, we could relocate the noise source successfully. In the South Hartoušov mofette field, we detected one dominant vertically extended noise source, probably a fluid pathway, as well as a small matched field processing maxima at the surface that can be related to a dry mofette.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.