Abstract
In this paper, proton implantation with different combinations of MeV energies and doses from 2×109 to 1×1011 cm-2 is used to create defects in the drift region of 10 kV 4H-SiC PiN diodes to obtain a localized drop in the SRH lifetime. On-state and reverse recovery behaviors are measured to observe how MeV proton implantation influences these devices and values of reverse recovery charge Qrr are extracted. These measurements are carried out under different temperatures, showing that the reverse recovery behavior is sensitive to temperature due to the activation of incompletely ionized p-type acceptors. The results also show that increasing proton implantation energies and fluencies can have a strong effect on diodes and cause lower Qrr and switching losses, but also higher on-state voltage drop and forward conduction losses. The trade-off between static and dynamic performance is evaluated using Qrr and forward voltage drop. Higher fluencies, or energies, help to improve the turn-off performance, but at a cost of the static performance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.