Abstract
To improve the corrosion resistance of 6061 Al in electric vehicle battery packs, a composite coating of nano-SiO2/Micro-Arc oxidation (MAO) ceramic structure was prepared on its surface. Electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization curves (PDP) were used to evaluate the corrosion resistance of the specimens after 7 days immersion in a 3.5% NaCl solution. The corrosion resistance of the prefabricated coatings was measured via local electrochemical impedance spectroscopy (LEIS). Confocal microscopy, scanning electron microscopy (SEM), and X-ray diffraction (XRD) were used to characterize the microstructure and phase composition of the specimens. An energy dispersive spectrometer (EDS) was used to detect the elemental composition of the surface of the specimen. The results showed that the specimen with nano-SiO2/MAO composite coating had the least amount of micropores and superior corrosion resistance. The global electrochemical impedance of nano-SiO2/MAO composite coating was 1.1 times higher than that of the MAO coating and 8.4 times higher than that of the 6061 Al. When the coating was defective, the local electrochemical impedance of the nano-SiO2/MAO composite coating was still two times higher than that of the MAO coating. In the presence of scratches, the nano-SiO2/MAO composite coating still showed high corrosion resistance. The collapse corrosion mechanism of the nano-SiO2/MAO composite coating was proposed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
