Abstract
The weld portion will have different mechanical properties in weld bead, HAZ and fusion boundary due to variation in the microstructure, chemistry and internal stresses that arise in the welding process. Inconel 718 TIG welded samples are tested to study the deformation behavior of the weld constituents with the help of non contact laser extensometer. Stress-strain curves for the individual constituents of weld, parent, fusion boundary and HAZ are evaluated at room temperature and at 550°C. Test results show that the welded samples exhibited 50% lower tensile properties compared to the parent material. Parent metal remains elastic through out the test. The proof stress of the weld alone is 100 MPa lower than the average proof stress of the welded sample when considered standard gauge length.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.