Abstract

Metal wear debris and released ions (CoCrMo), which are widely generated in metal-on-metal bearings of hip implants, are also found in patients with metal-on-polyethylene bearings due to the mechanically assisted crevice corrosion of modular taper junctions, including head-neck and neck-stem taper interfaces. The resulting adverse reactions to metal debris and metal ions frequently lead to early arthroplasty revision surgery. National guidelines have since been published where the blood metal ion concentration of patients must consistently be monitored after joint replacement to prevent serious complications from developing after surgery. However, to date, the effect of metal particles and metal ions on local biological reactions is complex and still not understood in detail; the present study sought to elucidate the complex mechanism of metal wear-associated inflammation reactions. The knee joints in 4 groups each consisting of 10 female BALB/c mice received injections with cobalt chrome ions, cobalt chrome particles, and ultra-high-molecular-weight polyethylene (UHMWPE) particles or PBS (control). Seven days after injection, the synovial microcirculation and knee joint diameter were assessed via intravital fluorescence microscopy followed by histological evaluation of the synovial layer. Enlarged knee diameter, enhanced leukocyte to endothelial cell interactions, and an increase in functional capillary density within cobalt chrome particle-treated animals were significantly greater than those in the other treatment groups. Subsequently, pseudotumor-like tissue formations were observed only in the synovial tissue layer of the cobalt chrome particle-treated animals. Therefore, these findings strongly suggest that the cobalt chrome particles and not metal ions are the cause for in vivo postsurgery implantation inflammation.

Highlights

  • Artificial joint replacement remains the standard procedure for treating the final stage of osteoarthritic joints and is as such one of the most frequently performed surgical procedures in orthopedic surgery [1]

  • Metal wear debris and released ions (CoCrMo), which are widely generated in metal-on-metal bearings of hip implants, are found in patients with metal-on-polyethylene bearings due to the mechanically assisted crevice corrosion of modular taper junctions, including head-neck and neck-stem taper interfaces. e resulting adverse reactions to metal debris and metal ions frequently lead to early arthroplasty revision surgery

  • To date, the effect of metal particles and metal ions on local biological reactions is complex and still not understood in detail; the present study sought to elucidate the complex mechanism of metal wear-associated inflammation reactions. e knee joints in 4 groups each consisting of 10 female BALB/c mice received injections with cobalt chrome ions, cobalt chrome particles, and ultra-high-molecular-weight polyethylene (UHMWPE) particles or Phosphate-buffered saline (PBS)

Read more

Summary

Introduction

Artificial joint replacement remains the standard procedure for treating the final stage of osteoarthritic joints and is as such one of the most frequently performed surgical procedures in orthopedic surgery [1]. Total hip replacement (THR) has been described as “the operation of the century” with its purpose being to relieve joint pain and reconstruct joint function [2, 3]. E pathogenesis of implant-associated aseptic loosening is usually considered to be originated by aseptic inflammatory response, which is mainly initiated by particulate debris and metal ions at the implant-bone interface [5]. Ultra-high-molecular-weight polyethylene (UHMWPE) and cobalt-chromium (CoCr) alloys are commonly used as bearing surface materials in metal-on-polyethylene (MOP) and metal-on-metal (MOM) THR [6]. Metal wear debris and released ions are continuously generated in BioMed Research International. Even in MOP bearings, metal wear particles and metal ions are generated due to the mechanically assisted crevice corrosion of modular taper junctions, including head-neck and neck-stem taper interfaces [8]

Objectives
Methods
Results
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call