Load-Frequency Control in a Two-Area Power System Using the Fuzzy-PID Method

Abstract

Power systems are plant units connected to each other, with the electrical power flow constantly moving between them and the load. All systems must be implemented in such a way that they remain stable not only under normal conditions but also after the implementation of unwanted inputs or malfunctions and should be able to return to stable nominal conditions as soon as possible. The basic factors of stability control in a power system are the frequency of different areas and the amount of power flow between them. Now that the main goals of stability control in a power system have been stated, these indicators must be kept at their desired levels through the design and implementation of controllers. This paper first describes the mechanism of load frequency control (LFC). The parameters of several types of complementary controllers are then designed based on the proposed algorithm. The controllers designed on the simulated power system are finally applied, and the effect of each controller on faster damping of frequency fluctuations is discussed. In this study, a multi-area power system is simulated and the effect of disturbance in each area and the performance of the proposed controller in controlling the frequency of the whole network are investigated. The case studies show that the share of active and reactive power generation sources in each region have the greatest impact on frequency control, given that the proposed control coefficients are determined using fuzzy logic in the shortest possible time and the number of transient oscillations eliminated, resulting in a steady system.