Abstract
To demonstrate and possibly to promote the increased use of timber bridges in U.S. transportation systems, various agencies, including the United States Department of Agriculture Forest Products Laboratory and FHWA, have supported research to develop improved glued laminated timber bridges. This project is part of this research and identifies acceptable live load deflection characteristics of timber bridges. The relationship between live load deflection and the condition of the asphalt wearing surface is of particular interest. To accomplish this, eight glued laminated timber girder bridges were selected for testing. The performance of the bridges was investigated under live load tests and through bridge inspections. The structures were load tested with fully loaded tandem-axle dump trucks, and global and differential deflection data were collected. Field tests revealed that a significant amount of the asphalt wearing-surface deterioration is the result of differential deck panel deflection.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Transportation Research Record: Journal of the Transportation Research Board
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
