Abstract
Nail penetration tests under adiabatic conditions are proposed as a new safety test method to simulate a short circuit caused by intrusion in the worst case scenario, i.e., adiabatic conditions. The behaviors of commercially available 18650 type lithium-ion cells with two different cell chemistries, LiNi0.33Co0.33Mn0.33O2 - LiCoO2 blend (NCM-LCO blend) vs. graphite and LiFePO4 (LFP) vs. graphite, were investigated at different states of charge (SoC). The results show a small standard deviation for the temperature and pressure measurements from five identical experiments. The detailed examination of the nail penetration experiments reveals differences in the safety properties of the cathode materials (LFP vs. NCM-LCO), separator types (PP PE PP trilayer vs. PE single layer) and electrode designs (high power vs. high energy). For both cell types, the observed cooling effect at high energy contents could be linked to an increased gas production due to the loss of electrolyte.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
