Abstract

Adequate waste disposal is currently under high demand in Australia, due to a rapid growth in population. Australia’s scarcity and cost for the use of clays (most commonly used landfill liner material) have resulted in a search for alternative materials to achieve satisfactory performance in landfill design. This study explored liquid limit and hydraulic conductivity (HC) of coal composites for potential landfill liner use. Brown coal (lignite) was mixed with polyacrylamide (PAM) or sodium bentonite (Bt) to investigate liquid limits (LL), HC, and swelling behaviour. Each additive was subject to distilled water and sodium chloride solution (50 g/l) to investigate the effects of pore fluid chemistry. The addition of 2 wt% PAM resulted in approximately 82 percentage point (pp) increase in the LL of lignite with distilled water and 76 pp increase with 50 g/l sodium chloride (NaCl) solution. The HC of lignite also decreased by more than two orders of magnitude as the PAM content increased. The swell index of lignite composites increased with the addition of PAM. This exploratory study has found the unique property of brown coal and its composites that the LL, HC and swell index do not deteriorate significantly in the presence of highly concentrated electrolyte solution (50 g/l NaCl). Such distinct properties will be beneficial over currently used landfill liner materials.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.