Abstract
A liquid emulsion membrane (LEM) system for vanadium (IV) transport has been designed using di‐2‐ethylhexyl phosphoric acid (D2EHPA), dissolved in n‐dodecane as carrier. The selection of extractant, D2EHPA, was made on the basis of conventional liquid‐liquid extraction studies. The work has been undertaken by first carrying out liquid‐liquid extraction studies for vanadium (IV) to get stoichiometric constant (n), and equilibrium constant (Kex), which are important for process design. Transport experiments were carried out at low vanadium (IV) concentration (ppm level). The studies on liquid emulsion membrane included i) the influence of process parameters i.e. feed phase pH, speed of agitation, treat ratio, residence time and ii) emulsion preparation study i.e., organic solvent, extractant concentration, surfactant concentration, internal strip phase concentration. When the strip phase concentration was 2 mol/dm3 (H2SO4) and feed phase pH 3 better extraction of vanadium was obtained. Higher Vm/V1 gave higher extraction of vanadium (IV). A simplified, design engineer friendly model was developed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
