Liquid concentration distribution and planar interface instability at an abruptly changing pulling velocity in directional solidification

Abstract

Liquid concentration distribution is seriously affected by an abruptly changing pulling velocity under directional solidification. Theoretical and numerical investi-gations indicate that at the pulling velocity jumping from V 0 to V , the solidification system does not achieve the pulling velocity V immediately, and it goes through a non-steady-state transition zone. As the pulling velocity abruptly increases ( V / V 0 > 1), interface liquid concentration firstly increases to the maximum and then decreases to the steadystate value. The magnitude of interface liquid concentration at the beginning increases with V / V 0 , the initial pulling velocity V 0 and the tem-perature gradient GL in the liquid. At the same time, solute diffusion length reduces with V / V 0 and G L . In contrast, the minimum of interface liquid concentration falls with V / V 0 at the pulling velocity decreasing abruptly. As the interface liquid con-centration enriched at V / V 0 > 1 is more than the value required for the planar inter-face to keep stable, the solid/liquid interface may become unstable. The analytical results are in agreement with the numerical calculation results of Al-2%Cu alloy.