Liquid Chromatographic-Atomic Absorption Spectrophotometric Method for Determination of Methyl Mercury in Seafood: Collaborative Study

Abstract

A previously developed method that uses a simplified sample preparation procedure and atomic absorption detection of liquid chromatographic eluates for the determination of methyl mercury in seafood has been collaboratively studied. The unique feature of the method involves the use of a specially designed interface for the generation of mercury vapor. Methyl mercury is isolated from the blended sample by chloroform elution from a diatomaceous earth-hydrochloric acid column. The organomercury compound is then extracted into a small volume of 0.01M sodium thiosulfate solution. An aliquot of this solution is injected onto a Zorbax ODS column and eluted with methanol-ammonium acetate solution (3 + 2), pH 5.7, containing 0.01% mercaptoethanol. Mercury is detected by flameless atomic absorption spectrophotometry using the interface. The samples analyzed in the study were unspiked swordfish, unspiked and spiked lobster, and unspiked and spiked tuna. The spiked samples contained methyl mercury both above and below the U.S. Food and Drug Administration guideline level of 1 microgram Hg/g. Reproducibility relative standard deviations ranged from 10.5% at 1 microgram Hg/g to 18.2% at about 0.1 microgram Hg/g. Accuracy, measured by comparison to reference values obtained by the Associate Referee, ranged from 94.4 to 99.6%. The method has been adopted official first action.