Liquefaction assessment by the unit energy concept through centrifuge and torsional shear tests

Abstract

Listen

Translate article

The fundamentals of the energy concept to assess the liquefaction potential of cohesionless soils have been formulated in recent years. To examine the validity of this procedure, a series of centrifuge liquefaction tests were carried out using the same soils that were tested previously as part of extensive research conducted on the subject at Case Western Reserve University. A total of 30 liquefaction tests at accelerations of 50g and 60g were conducted on scaled pore fluid saturated models, prepared in a laminar box, representing a prototype soil deposit. The influence of relative density and effective confining pressure, as well as the effect of different grain size distribution on the energy per unit volume required for liquefaction, is studied. Generalized relationships were obtained by performing regression analyses between the energy per unit volume at the onset of liquefaction and liquefaction affecting parameters. These equations are compared with similar ones that were developed previously using torsional shear tests. A rational procedure to determine site response to earthquake loading and liquefaction susceptibility of a soil deposit is verified.